Product ID:EPK 660 AVARIAN-TORRSEAL EPOXY AA0660-EPK-660
MSDS Date:11/10/1993
FSC:8030
NIIN:00-998-3321
Kit Part:Y
MSDS Number: CCJZJ

VARIAN

121 HEARTWELL AVE.
LEXINGTON, MA 02173
US

Emergency Phone: 800-8VARIAN

Info Phone: 800-8VARIAN

Cage: KO079

VARIAN ASOCIATES INC, VACUUM PRODUCTS DIV

LEXINGTON, MA 02173-3125 US

Telephone: 617-7200

Cage: 04399

SILICA, CRYSTALLINE - QUARTZ GROUP 2A CARCINIGEN PROB.

CAS: 14808-60-7

RTECS: VV7330000

Fraction By Weight: .581%

OSHA PEL 0.1MG/M3

ACGIH TLV: 0.1 MG/M3 RDUST;

EPOXY RESINS

CAS: 25068-38-6

RTECS: SL6475000

Fraction By Weight: 30-60%

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:EYE:MAY BE MODERATELY IRRIT MAY CAUSE
THERMAL BURNS AT HIGH TEMPS. SKIN: MAY BE MODERATELY IRRIT MAY
CAUSE SKIN SENSITIZATION.MAY CAUSE THERMAL BURNS AT HIGH TEMPS.
INGEST: ASSUMED LOW ORDER ACUTE ORA L TOXICITY. INHAL:CHRONIC MAY
CAUSE SCARRING OF LUNGS W/COUGH/SHORTNESS OF BREATH. DELAYED LUNG
INJURY, SILICOSIS-**
Explanation of Carcinogenicity:QUARTZ CRISTYLLINE SYLLICA IS LISTED AS
A GROUP 2 CARCINOGENPROBABLY CARCENOGENIC TO HUMANS BY IARC.
Effects of Overexposure:IRRIT AS NOTED SKIN SENSITIZATION. ALERGY MAY
BE EVIDENCED BY RASHES ESPECIALLY HIVES.
**DISABLING/PROGRESSIVE/SOMETIMES FATAL PULMONARY FIBROSIS (TYPICAL
NODULATION OF LUNGS)
Medical Cond Aggravated by Exposure:PREEXISTING SKIN/EYE DISORDERS MAY
BE AGGRAVATED BY EXPOSURE TO PROD.

First Aid:EYE:FLUSH W/WATER FOR 15 MIN HOLDING EYELIDS OPEN GET MED
AID. IF CONTACT W/HOT PROD OCCURS IMMED FLUSH W/COOL WATER 15 MIN.
GET MED AID. SKIN: REMOVE CONTAM CLOTHES SHOES/WIPE OFF EXCESS FROM
SKIN FL USH W/WATER FOLLOW BY WASHING W/SOAP &WATER. IF IRRIT
OCCURS GET MED AIDDO NOT REUSE CLOTHES UNTIL CLEANED. CONTAM
LEATHER ART INCL SHOES CANNOT BE DECONTAMINATED DESTROY TO PREVENT
REUSE. ***

Flash Point Method:PMCC
Flash Point:480F,249C
Extinguishing Media:WATER FOG, FOAM, DRY CHEM OR CO2.
Fire Fighting Procedures:WILL NOT BURN UNLESS PREHEATED. DO NOT ENTER
CONFINED SPACE W/O HELMET/FACE SHIELD/BUNKER COAT/GLOVES/RUBBER
BOOTS/POSITIVE PRESSURE NIOSH APPROVED SCBA.
Unusual Fire/Explosion Hazard:NONE. COOL FIRE EXPOSED CONTNRS W/WATER.

Spill Release Procedures:SCRAPE UP & TRANSFER TO METAL CONTNR. WIPE UP
REMAINING RESIDUE W/SOLVENTS OBSERVING SOLVENT FLAMABILITY CAUTIONS
OR USE DETERGENT.

Handling and Storage Precautions:STORE IN COOL DRY PLACE W/ADEQUATE
VENT. KEEP AWAY FROM OPEN FLAME, HIGH TEMPERATURE HANDLE IN
ACCORDANCE W/HAZARD POTENTIAL OF CURING AGENTS USED.
Other Precautions:MAY CAUSE IRRIT, AVOID EYE/SKIN CONTACT.

Respiratory Protection:NOT ORDINARILY REQ IF RESIN IS WARMED OR HEATED
VAPORS/MISTS MAY BE PRODUCED. IN SUCH CASES USE NIOSH APPROVED
RESPIRATOR FOR ORGANIC VAPORS.
Ventilation:LOCAL EXHAUST RECOMMENDED. MECHANICAL ACCEPTABLE.
Protective Gloves:IMPERVIOUS, PLASTIC, OR RUBBER.
Eye Protection:SAFETY GLASSES OR GOGGLES.
Other Protective Equipment:SAFETY SHOWER, EYEWASH STATION.
Supplemental Safety and Health
NK***IF CONTACT W/HOT PROD OCCURS IMMED FLUSH W/COOL WATER 15
MIN.CAREFULLY REMOVE CLOTHING IF CLOTHING IS STUCK TO BURNED AREA
DONT PULL OFF CUT AROUND.COVER BURN W/CLEAN MTRL.GET MED
AID.INHAL:REMOV E TO FRESH AIR.IF BREATH DIFF GET MED AID.INGEST:IF
LRG AMT GET MED ADVICE. DR NOTE:EMISIS GENERALLY UNNECESSARY.

Boiling Pt:B.P. Text:>500F,>260C
Vapor Pres:NIL
Vapor Density:NA
Spec Gravity:1.57
Evaporation Rate & Reference:NA
Solubility in Water:INSOLUBLE.
Appearance and Odor:WHITE HIGH VISCOSITY LIQ. MILD ODOR.
Percent Volatiles by Volume:0%

Stability Indicator/Materials to Avoid:YES
NK *CONSIDERABLE HEAT IS RELEASED.
Stability Condition to Avoid:CAN REACT VIGOROUSLY W/STRONG OXIDIZING
ATENTS & STRONG LEWIS OR MINERAL ACIDS IN REACTIONS W/MANY CURING
AGENTS *
Hazardous Decomposition Products:CARBON MONOXIDE, ALDEHYDES, ACIDS &
HEAT.

Waste Disposal Methods:CLEAN UP AND DISPOSAL SHOULD BE IN ACCORDANCE
W/FEDERAL.STATE/LOCAL ENVIRONMENTAL CONTROL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.